Loading... Please wait...

Ford 6.0L Updated Standpipes and Dummy Plugs

Posted on 14th Jun 2012 @ 10:54 AM

The Ford 6.0L Powerstroke Updated Standpipe Tube and Dummy Plug Kits are now available at http://FordSuperDutyParts.com.

Kit Includes:

Includes:

2x Ford: 6E7Z-9A332-A
2x Ford: W302908

Technical Information:

Ford updated stand pipes for all 2004-2007 Ford 6.0 engines. The old style rail plugs were prone to o-ring failure. Symptoms are loss of ICP pressures which can cause no start or stalling. It's also sometimes misdiagnosed as a badIPR valve or HPOP.  These have been updated with a back up PTFE washer.  The single most typical symptom of failed standpipe and rail plug o-ring failure, is a hard re-start when the engine is hot.  Even when the 6.0L engine starts normally after a cold-soak, it may be very hard to re-start after it has reached operating tempature, has been shut off, and an attempted re-start is made.  This is due to an "internal oil leak" caused by the thin, hot, oil bypassing inside the system due to failed o-rings on the standpipes and rail plugs.  The updated plugs (and stand pipes) now have a PTFE washer to help prevent re-occuring failure.  Update yours today!